Go-live checklist

Use this checklist before production go-live. Each step has an explicit pass criterion.

• Region / sub-band — Toolbox region matches LNS device profile. US915/AU915: gateway/LNS on the same plan as the device (factory default hybrid sub-band 1: channels 0–7 + 64). AS923: AS923-1 on LNS.
• USB commissioning — JoinEUI, AppKey, region, port types set via Toolbox; Toolbox version OK for firmware
• LNS device created — DevEUI registered; OTAA keys match device
• OTAA join — Join Accept visible; device active; storage voltage above limit
• Codec — MOIZ reference decoder on the LNS and/or in your integration service; FPort 1 uplinks produce JSON without decode errors
• Serial consistency — serial_number in JSON matches expected unit / registry
• Process data — Normal uplink status:1 with port metrics plausible for connected probes
• Downlink (optional) — SET/GET → ACK 0xAA on FPort 2
• Persistence — Rows in raw/normalized tables with correct timestamps
• Downstream app — Dashboard/SCADA/historian shows data within one measurement period

Troubleshooting pointers

• No join — check thermal power / USB pre-charge and voltage_limit
• Join OK but no uplinks (US915/AU915) — check sub-band alignment between device and gateway
• Join OK but no measurements — Idle mode or below voltage threshold
• Decode errors — codec version vs firmware (LNS and/or worker)
• Wrong values — calibration and port type