← Back to MOIZ Toolbox
MOIZ Toolbox — quick guide

Check & update

Verify measurements over USB, then flash firmware when needed.

Live data

Open Live data to poll ports in real time and confirm sensors before leaving the site. Export CSV if you need a record.

USB polling while the device is connected.

Firmware update

  1. Open Firmware update.
  2. Pick an image from the MOIZ catalog, or browse a local .img.
  3. Click Flash. Do not unplug USB until finished.
  4. Reconnect and check the firmware version on the hub card.
If flash fails, the COM port may show “(bootloader)” — retry from this page.

Field issues? See Help.

MOIZ Toolbox · customer guide